Description
Cat6 LAN Patch Cable Black
This LAN Patch Cable conforms to ACMA/ACA Requirements A-Tick: N1107 AS/ACIF S008:2020 – Each cord has eight multi-strand conductors in 4 twisted-pair T568A color coded configuration
Each cord has eight multi-strandconductors in 4 twisted-pair T568A color coded configuration
CAT6 UTP PATCH LEADS
Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet and other network protocols that are backward compatible with the Category 5/5e and Category 3 cable standards. Compared with Cat-5 andCat-5e, Cat-6 features more stringent specifications for crosstalk and system noise. The cable standard provides performance of up to 250 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10-Gigabit Ethernet).
To maintain transmission characteristics and network integrity, it’s essential to use the correct type of patch-cord to match the installation. A network port will perform only at the level of the LOWEST-rated component in the chain.
If a Cat-5 or Cat-5E patch-cord is used in a Cat-6 system, only Cat-5 or Cat-5E specifications will be achieved for that circuit. Furthermore many manufacturers have cables that do not meet the strict requirements set out in the CAT6 certification. Pro2 cables are batch tested to maintain the high quality required to meet CAT6 certification across all lengths available.
Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet and other network protocols that are backward compatible with the Category 5/5e and Category 3 cable standards. Compared with Cat-5 andCat-5e, Cat-6 features more stringent specifications for cross talk and system noise. The cable standard provides performance of up to 250 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10-Gigabit Ethernet).
To maintain transmission characteristics and network integrity, it’s essential to use the correct type of patch-cord to match the installation. A network port will perform only at the level of the LOWEST-rated component in the chain.
If a Cat-5 or Cat-5E patch-cord is used in a Cat-6 system, only Cat-5 or Cat-5E specifications will be achieved for that circuit. Furthermore many manufacturers have cables that do not meet the strict requirements set out in the CAT6 certification. Pro2 cables are batch tested to maintain the high quality required to meet CAT6 certification across all lengths available.
FEATURES:
UTP CAT6 Patch Lead – Each cord has eight multi-strand conductors in 4 twisted-pair T568A color coded configuration.
Quality cable material – Fitted with 50µª Category-6 compliant 2-row (staggered pins) plug and fully-molded strain-relief boot.
Molded strain relief & Low profile flush moulded boots – With molded strain relief RJ45 male-to-male connectors this cable will be strong, and robust.Packaged in heat-sealed hang-sell bags. Complies with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 Category 6. Complies with the applicable electrical transmission characteristics specified in: TIA/EIA-568-B.2-1 Category 6
Specifications
TIA 568 Category: Cat6
ISO 11801 Class: Class E
Shielded: No
Patch Lead Length (M): 0.3
TIA 568 Wiring Scheme: T568A
Cable Jacket Material: PVC
Jacket Diameter (mm): 6
Conductor Material: Bare Copper
Patchlead Colour: Black
Number of Pairs: 4
Connector end A: RJ45
Connector end B: RJ45
Stock Number Summary
Black 0.3m – 409041
Black 0.5m – 409012
Black 1.0m – 409043
Black 2.0m – 409044
Black 3.0m – 409045
Black 5.0m – 409046
