Description
Telecom Splice Connector Yellow 2 Way 100Pk
Telecom Splice Connectors are specifically designed to quickly connect two or three Telecom conductors. Simply insert the un-stripped wires, and crimp the cap of the connector using the correct crimping tool (Part No. TELSP2), and the wires are connected forever. These connectors are commonly referred to as “Scotch Locks”
Telecom Splice Connector Features
• Connectors are grease filled to ensure a moisture proof connection
• Bodies are made from polycarbonate plastic that resists splitting, rough handling and solvents
Instructions
The connection method is an IDC (Insulation Displacement Connection), which is proven to be stable in the long term. Two IDC elements are used in each connection for greater
joint integrity.
Note: Ensure any crimp tool used has a parallel action, like the TELSP2 tool. Many low cost tools have a plier action, which is not recommended for crimping these connectors.
Technical Data
Specifications
The UR Connector accepts two or three solid copper conductors for butt splicing.
The connector is filled with sealant to
provide moisture resistance.
Max insulation diameter (mm): 1.67
Cable style and wire diameter (mm):
Full plastic (unfilling): 0.4-0.9
Full plastic (filling): 0.4-0.9
Mechanical Performance
Plastic Housing: PC (UL 94v-0)
Contacts: Phosphor Bronze
Wire Insertion Force: 45N Typical
Wire Pull out Force: 40N Typical
Use Times: >100
Environment Characteristics
Storage Temperature Range: -40 ºC ~ +120 ºC
Operating Temperature Range: -30 ºC ~ +80 ºC
Relative Humidity: <90% (at 20 ºC)
Atmospheric Pressure: 70KPa ~106KPa
Electrical Performance
Insulation Resistance: R ≥ 1000M Ohm
Contact Resistance: R ≤ 5m ohm
Dielectric Strength: 1200V DC 60s
can’t spark over and do not have fly arc
Constant Current: 5KA 8/20u Sec
Surge Current: 10KA 8/20u Sec
